Experimental and Numerical Investigation on Effects of the Steam Ingestion on the Aerodynamic Stability of an Axial Compressor

In order to investigate the influence of steam ingestion on the aerodynamic stability of a two-stage low-speed axial-flow compressor, multiphase flow numerical simulation and experiment were carried out. The total pressure ratio and stall margin of the compressor was decreased under steam ingestion. When the compressor worked at 40% and 53% of the nominal speed, the stall margin decreased, respectively, by 1.5% and 6.3%. The ingested steam reduced the inlet Mach number and increased the thickness of the boundary layer on the suction surface of the blade. The low-speed region around the trailing edge of the blade was increased, and the flow separation region of the boundary layer on the suction surface of the blade was expanded; thus, the compressor was more likely to enter the stall state. The higher the rotational speed, the more significant the negative influence of steam ingestion on the compressor stall margin. The entropy and temperature of air were increased by steam. The heat transfer between steam and air was continuous in compressor passages. The entropy of the air in the later stage was higher than that in the first stage; consequently, the flow loss in the second stage was more serious. Under the combined action of steam ingestion and counter-rotating bulk swirl distortion, the compressor stability margin loss was more obvious. When the rotor speed was 40% and 53% of the nominal speed, the stall margin decreased by 6.3% and 12.64%, respectively.     

Changes of microflora in high pressure treated Indian white prawn (Fenneropenaeus indicus)

ABSTRACT

This study was to investigate the piezotolerance and diversity indices of microflora of Indian white prawn (Fenneropenaeus indicus) after high pressure (HP)-treatment. Indian white prawns subjected to HP-treatments and its effect was studied up to species level and compared with unpressurized samples. The bacterium was identified by using bacterial identification schemes, biochemical tests and API kits (bioMérieux, Marcyl’Etoile, France). Diversity analysis was performed using PRIMER (Plymouth Routines in Multivariate Research) software v 5.2.2. The significant elimination of microflora was found to be proportional with the pressure level. In the case of spore formers, mere destruction was noticed after HP-treatment. Arthrobacter spp., Listeria grayi and Corynebacterium spp. were the most piezotolerant bacteria in HP-treated samples. Diversity indices revealed a significant reduction of microflora of Indian white prawn. The apparent reduction of microflora with pressure level was clearly evident from the diversity indices; moreover a diminished piezotolerance of Gram negative spoilage bacteria was also observed.     

Pressure induced lattice anomalies in pnictides

Hydrostatic pressure Raman and synchrotron XRD measurements at room temperature have been carried out on a series of NdFeAsO_1−xF_y (Nd1111) oxypnictides in order to investigate pressure-induced lattice modifications. The synchrotron XRD data indicate that there is an increased deviation of the lattice constants from smooth pressure dependence in the superconducting compound, in close agreement with the results from SmFeAsO_1−xF_x (Sm1111), although the effect is less pronounced in Nd1111. As in Sm1111 the hydrostatic pressure Raman measurements show that the A_1g mode of the rare earth atom deviates from the linear pressure dependence. Anomalous pressure dependence and a hysteresis is observed in the phonon width of the phonon modes. The calculated Grüneisen parameter for the Nd phonon is very similar to the corresponding value for SmFeAsO_1−xF_x compound and it does not vary with substitution. For the As mode it has a lower value indicating a stiffer phonon with the increased ion size. In connection with the XRD measurements the Raman data show a sudden increase of the pressure-induced lattice anomalies close to doping where the compounds become superconducting.     

Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Study of all stages of the Diels–Alder reaction of cyclopentadiene with 2,3-dicyano-1,4-benzoquinone and monoadducts: Kinetics,thermochemistry, and high pressure effect

The kinetic parameters and enthalpies of the Diels–Alder reactions between cyclopentadiene and 2,3-dicyano-1,4-benzoquinone leading to the formation of two different monoadducts and bisadduct were determined. The stability of adducts is compared. Monoadduct appears to be thermodynamically more stable than the bisadduct. Comparison with the other Diels–Alder reactions studied previously allows us to conclude that the heat effects upon formation of the considered Diels–Alder adducts are the lowest in comparison with all the studied dienophiles.     

An experimental and modeling study of the oxidation of n-heptane,ethylbenzene, and n-butylbenzene in a jet-stirred reactor at pressures up to 10 bar

In the context of better understanding pollutant formation from internal combustion engines, new experimental speciation data were obtained in a high-pressure jet-stirred reactor for the oxidation of three molecules, which are considered in surrogates of diesel fuel, n-heptane, ethylbenzene, and n-butylbenzene. These experiments were performed at pressures up to 10 bar, at temperatures ranging from 500 to 1 100 K, and for a residence time of 2 s. Based on results previously obtained close to the atmospheric pressure for the same molecules, the pressure effect on fuel conversion and product selectivity was discussed. In addition, for the three fuels, the experimental temperature dependence of species mole fractions was compared with simulations using recent literature models with generally a good agreement. For n-heptane, the obtained experimental data, at 10 bar for stoichiometric mixtures, included the temperature dependence of the mole fractions of the reactants and those of 21 products. Interestingly, the formation of species previously identified as C₇ diones was found significantly enhanced at 10 bar compared with lower pressures. The oxidation of ethyl- and n-butylbenzenes was investigated at 10 bar for equivalence ratios of 0.5, 1, and 2. The obtained experimental data included the temperature dependence of the mole fractions of the reactants and those of 13 products for the C₈ fuels and of 19 products for the C₁₀ one. For ethylbenzene under stoichiometric conditions, the pressure dependence (from 1 to 10 bar) of species mole fraction was also recorded and compared with simulations with more deviations obtained than for temperature dependence. For both aromatic reactants, a flow rate analysis was used to discuss the main pressure influence on product selectivities.     

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Pitch has been used to prepare electrodes by high-temperature heat treatments for supercapacitors, lithium-ion batteries, on account of its rich aromatic ring structure. Here, the toluene-soluble component of pitch is used to prepare a kind of laminated carbon. This was realized by a template-free synthesis at low temperature with the addition of pressure. The toluene-soluble component has a small molecular weight, which makes the thermal deformation ability stronger and then enhances the orientation of the carbon layer with the help of pressure. The prepared anode exhibits a splendid electrochemical performance compared with the traditional graphite anode. A high stable capacity of approximately 550 mAh g⁻¹ at 50 mA g⁻¹, which is much higher than graphite (372 mAh g⁻¹), is obtained. Also, when the current density is up to 2 A g⁻¹, the capacity is about 150 mAh g⁻¹. Surprisingly, it also delivers a superior cycling performance. And when used as the anode/cathode electrode for lithium-ion capacitors, a high energy density can be obtained. The present work offers an opportunity to utilize the pitch source in lithium energy storage with promising cycle life, high energy/power density, and low cost.     

Nano-polycrystalline diamond anvils: key devices for XAS at extreme conditions: their use,scientific impact,present status and future needs

ABSTRACT

Nano-polycrystalline diamonds (NPDs) have become fundamental tools for cutting-edge X-ray absorption spectroscopy (XAS) studies at high P/T conditions that opened up new research directions by overcoming previous limitations. Indeed, NPDs yield a continuous and weak X-ray background signal which enables the collection of high-quality XAS data of materials compressed in diamond anvil cells. This is a critical advantage over the classically used single-crystal diamonds that generate strong parasitic signals (glitches) which render the analysis of XAS data in many cases impossible. In this contribution we give an overview of the impact and the scientific opportunities that NPDs opened up for extreme condition XAS spectroscopy at the European Synchrotron Radiation Facility and discuss future needs.     

THE MODIFIED TRIPLES ALGORITHM FOR FLUSH AIR DATA SENSING SYSTEM APPLIED TO THE VEHICLE WITH BLUNT FORE-BODIES1)

针对传统的用于钝头体飞行器的嵌入式大气数据传感系统的经典三点式算法对测压孔配置约束性严格的特点,对经典三点式算法进行了改进及验证。首先,对于经典三点式算法及改进算法进行了论述;其次,针对不同测压孔配置对算法精度的影响进行了系统的评估;最后,对于传统的经典三点式算法与改进三点式算法的优劣进行了比较。结论为：(1)改进的三点式算法对于测压孔的配置敏感性变差,即对测压孔约束很宽松,可用测压孔数增加,从而使得算法的适用性更强;(2)改进的三点式算法的精度与三点式算法相当,但是需要对测压孔进行系统选取及对比验证。     

The thermophysical properties of low‐temperature Pb plasma

The thermophysical properties of low‐temperature Pb plasma are calculated at temperatures 10–100 kK and densities below 0.2 of the solid‐state value. The thermodynamic values (pressure and internal energy) and transport coefficients (electrical conductivity, thermal conductivity, and thermal power) are considered. The plasma composition and thermodynamic parameters are obtained within the chemical approach, namely by means of the solution of the corresponding system of the coupled mass action law equations. Atom ionization up to +4 is taken into consideration. The electronic transport coefficients are calculated within the relaxation time approximation. The results obtained by means of the present model are compared with the available data of other models and experiments.